Suzuki GSX-R 1000 Owners Manual: Spring pre-load adjustment
The adjustment can be performed by changing the adjuster ring position. However, suzuki recommends that this adjustment be done by your authorized suzuki dealer, since a special tool is needed for this job.
Rear suspension
...
Damping force adjustment
The rebound and compression
damping force can be individually
adjusted by turning the respective
adjusters. The rebound damping
force adjuster 1 is located at the
bottom of the rear suspension.
...
Other materials:
Drive chain
This motorcycle has a master link
type drive chain. We recommend
that you take your motorcycle to
an authorized suzuki dealer if the
drive chain needs replacing.
The condition and adjustment of
the drive chain should be checked
each day before you ride. Always
follow the guidelines for ins ...
Cam chain guide inspection
Inspect the cam chain guide in the following procedures:
remove the cam chain guides. Refer to “cam chain guide / cam chain
tensioner removal and installation” .
Check the contacting surface of the cam chain
guides. If it is worn or damaged, replace it with a new
one.
...
Front wheel assembly construction
Brake disc bolt
Brake caliper mounting bolt
Front axle bolt
Front axle pinch bolt
Clearance
18 N·m (1.8 Kgf-m,
13.0 Lbf-ft)
39 N·m
(3.9 Kgf-m, 28.0 Lbf-ft)
100 N·m
(10 kgf-m, 72.5 Lbf-ft)
23 N·m
(2.3 Kgf-m, 16.5 Lbf-ft)
...