Suzuki GSX-R 1000 Service Manual: Starter button inspection
Inspect the starter button in the following procedures:
- remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .
- Disconnect the right handlebar switch coupler (1).
- Inspect the starter button for continuity with the
tester.
If any abnormality is found, replace the right handle switch assembly with a new one. Refer to “handlebar removal and installation” in section 6b .
Special tool
: 09900–25008 (multi circuit tester
set)
Tester knob indication
continuity (
)
- After finishing the starter button inspection, reinstall the removed parts.
Starter clutch inspection
Refer to “starter clutch removal and installation” .
Starter clutch
Install the starter driven gear onto the starter clutch.
Turn the starter driven gear by hand to inspect the
starter ...
Specifications
Service data
Electrical
unit: mm
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Starter motor components”
Refer ...
Other materials:
DTC “c49” (p1656): pair control solenoid
valve circuit malfunction
Detected condition and possible cause
Detected condition
Possible cause
Pair control solenoid valve voltage is not input to ecm
Pair control solenoid valve circuit open or short.
Pair control solenoid valve malfunction.
Ecm malfunction.
...
Special tools and equipment
Recommended service material
Note
required service material is also described in the following.
“Exhaust system components”
Special tool
...
Transmission related parts inspection
Refer to “transmission removal” , “transmission installation” and
“countershaft gear / driveshaft gear disassembly and assembly” .
Gearshift fork to groove clearance
Note
the clearance for each gearshift fork plays
an important role in the smoothness and
positiveness of the ...