Suzuki GSX-R 1000 Service Manual: Starter motor components
|
10
4 N·m (0.4
5 N·m (0.5
Apply grease to sliding
Apply moly paste to sliding
Do not reuse
Starter motor removal and installation
Removal
Turn the ignition switch off and disconnect the
battery (–) lead wire (1).
Lift and support the fuel tank. Refer to “fuel tank
removal and installation” in section 1g (page 1g- ...
Other materials:
Idle speed
Adjust the engine idle speed periodically on the engine at normal operating
temperature.
To adjust the idle speed:
Lift the fuel tank by referring to
the air cleaner section.
Start the engine and warm it
up by running at idling speed
for 10 minutes in summer
(where ambie ...
Damping force adjustment
The rebound and compression
damping force can be individually
adjusted by turning the respective
adjusters. The rebound damping
force adjuster 1 is located at the
bottom of the rear suspension.
The compression damping force
adjuster 2 is located at the left
side of the motorcycle.
To ad ...
Loading guidelines
This motorcycle is primarily
intended to carry small items
when you are not riding with a
passenger. Follow the guidelines
below to carry a passenger or
cargo:
balance the load between the
left and right side of the motorcycle
and fasten it securely.
Place cargo weight as ...