Toyota RAV4 manuals

Suzuki GSX-R 1000 Service Manual: Steering components

Suzuki GSX-R. Handlebars inspection



  1. Steering stem head nut
  2. Steering stem upper bracket
  3. Steering stem lock-nut
  4. Washer
  5. Steering stem nut
  6. Dust seal cover
  7. Dust seal
  8. Steering stem upper bearing
  9. Steering stem lower bearing
  10. Lower seal
  11. Steering stem lower bracket
  12. Steering stem lower bearing inner race
  13. 90
    N·m (9.0 Kgf-m, 65.0 Lbf-ft)
  14. 80 N·m
    (8.0 Kgf-m, 58.0 Lbf-ft)
  15. 45 N·m
    (4.5 Kgf-m, 32.5 Lbf-ft) then turn back 1/2 – 1/4
  16. 23 N·m
    (2.3 Kgf-m, 16.5 Lbf-ft)

Apply grease.


Do not reuse.

Handlebars inspection
Refer to “handlebar removal and installation” (page 6b- 2). Inspect the handlebars for distortion and damage. If any defect is found, replace the handlebar with a new one. ...

Steering damper construction
Steering damper Dust seal Bearing 23 N·m (2.3 Kgf-m, 16.5 Lbf-ft) Apply grease. ...

Other materials:

Engine oil and filter change
Change the engine oil and oil filter at the scheduled times. The engine should always be warm when the oil is changed so the oil will drain easily. The procedure is as follows:  Place the motorcycle on the side stand. Remove the three screws of the right fairing 1. ...

Rear shock absorber bearing removal and installation
Removal Remove the rear shock absorber. Refer to “rear shock absorber removal and installation” .  Remove the spacer (1). Remove the rear shock absorber bearing with the special tool. Special tool (a): 09943–88211 (pinion bearing installer) Installation C ...

Specifications
Service data Suspension unit: mm (in) Tightening torque specifications Note the specified tightening torque is described in the following. “Front fork components” Reference: for the tightening torque of fastener not specified in this section, refer to “tightening ...

© 2011-2024 Copyright www.suzukigsxr.org