Suzuki GSX-R 1000 Owners Manual: Tampering with noise control system prohibited
Federal law prohibits the following
acts or the causing there of;
- The removal or rendering inoperative
by any person other
than for purposes of maintenance,
repair, or replacement,
of any device or element of
·design incorporated into any
new vehicle for the purpose of
noise control prior to its sale or
delivery to the ultimate purchaser
or while it is in use, or
- The use of the vehicle after
such device or element of
design has been removed or
rendered inoperative by any
person.
Among those acts presumed to
constitute tampering are the acts
listed below:
- Removing or puncturing the
muffler, baffles, header pipes,
screen type spark arrester (if
equipped) or any other component
which conducts exhaust gases.
- Replacing the exhaust system
or muffler with a system or
muffler not marked with the
same model specific code as
the code listed on the motorcycle
noise emission control
information label, and certified
to appropriate epa noise standards.
- Removing or puncturing the air
cleaner case, air cleaner
cover, baffles, or any other
component which conducts
intake air.
Whenever replacing parts on your
motorcycle, suzuki recommends
that you use genuine suzuki
replacement parts or their equivalent.
If you believe that your vehicle
has a defect which could cause a
crash or could cause injury or
death, you should immediately
inform the national highway traffic
safety administration (nhtsa)
i ...
You need to know the frame and
engine serial numbers to get title
documents for your motorcycle.
You also need these numbers to
help your dealer when you order
parts.
The frame number 1 is ...
Other materials:
Front brake disc removal and installation
Removal
Remove the front wheel assembly. Refer to “front wheel assembly removal
and installation” in section 2d .
Remove the front brake disc.
Installation
Install the front brake disc in the reverse order of
removal. Pay attention to the following points:
make sure ...
Using the transmission
The transmission is provided to
keep the engine operating
smoothly in its normal operating
speed range. The gear ratios
have been carefully chosen to
meet the characteristics of the
engine. The rider should always
select the most suitable gear for
the prevailing conditions. Never
slip the c ...
Specifications
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Body frame construction” “front footrest bracket construction”
“side-stand construction”
Reference: for the tightening torque of fastener not specified in this ...