Suzuki GSX-R 1000 Owners Manual: The sport of motorcycling
Your motorcycle and this owner's manual have been designed by people like you who enjoy motorcycling.
People become motorcyclists for many reasons. For starters, street riding is fun and invigorating. But no matter why you became a motorcyclist, or how experienced you are, you will eventually face some challenging situations.
In preparing for these challenges, you will be fine-tuning your coordination, concentration, and attitude.
Learning the skills and strategies associated with motorcycling is the basis for safely participating in this sport. Many motorcyclists find that as they become better riders, they also get more enjoyment from the freedom unique to motorcycling.
Please remember:
- Most accidents can be avoided
- If you don't have a helmet, buy a helmet and wear it every time you ride
- If a collision is imminent, do something
- Special situations require special care
- Know your limits
- Be extra safety-conscious on bad weather days
- Practice away from traffic
- Inspection before riding
- Accessories and loading
- Carrying a passenger
- Conclusion
Foreword
Motorcycling is one of the most
exhilarating sports and to ensure
your riding enjoyment, you should
become thoroughly familiar with
the information presented in this
owner's manual before riding ...
Most accidents can be avoided
The most common type of motorcycle
accident in the u.S. Occurs
when a car traveling towards a
motorcycle turns left in front of the
motorcycle. Is that because other
drivers are out to get motorc ...
Other materials:
Valve seat repair
The valve seats (1) for both the intake and exhaust
valves are machined to three different angles. The seat
contact surface is cut at 45°.
Intake valve
Exhaust valve
Caution
the valve seat contact area must be
inspected after e ...
Engine coolant
Coolant level
The engine coolant solution
should be between "f" (full) and
"1..:' (Low) level lines on the engine
coolant reservoir. If the level is
lower than "1..:' (Low) level line,
bring it up to "f" (full) level by adding
50:50 mixture of distilled water ...
Thermostat inspection
Inspect the thermostat in the following procedures:
remove the thermostat. Refer to “thermostat removal and installation” .
Inspect the thermostat pellet for signs of cracking.
Test the thermostat at the bench for control action.
Caution
do not contact ...