Removal
Installation
Install the throttle cables in the reverse order of removal.
Pay attention to the following points:
Refer to “throttle cable play inspection and adjustment” in section 0b .
Throttle cable inspection
Check that the throttle grip moves smoothly from full open to full close. If it does not move smoothly, lubricate the throttle cables.
Throttle cable play inspection and adjustment
Refer to “throttle cable play inspection and adjustment” in section 0b .
Iat sensor inspection
Refer to “dtc “c21” (p0110-h/l): iat sensor circuit malfunction” in section
1a .
Inspect the iat sensor.
Note
iat sensor resistance measurement method
is the same way as that of the ect sensor.
Refer to “ect sensor inspection” (page 1c-
4).
Caution
& ...
Specifications
Service data
Fi sensors
Tightening torque specifications
Note
the specified tightening torque is described in the following.
“Exhaust control system construction” “exhaust system components”
Reference: for the tightening torque of fastener not specified in this ...
Handlebar removal and installation
Removal
Remove the following parts from the left handlebar.
left handlebar switch box (1)
handlebar balancer (2)
grip rubber (3)
clutch cable (4)
Remove the following parts from the right handlebar.
right handlebar switch box (5)
...