Warning
Follow these instructions:
|
Warning
Use extra care when riding on new tires. Perform proper break-in of the tires referring to the break-in section and avoid hard acceleration, hard cornering, and hard braking for the first 100 miles (160 km). |
Camshaft inspection
Refer to “engine top side disassembly” .
Refer to “engine top side assembly” .
Camshaft identification
The exhaust camshaft has the embossed letters “ex”
and the intake camshaft has the embossed letters “in”.
Cam wear
Check the camshaft for wear or damage.
Measure the cam height “a” w ...
Starter torque limiter removal and
installation
Removal
Remove the clutch assembly. Refer to “clutch removal” in section 5c .
Remove the washer (1), starter idle gear no. 1 (2)
And starter torque limiter (3).
Installation
Installation is in the reverse order of removal. Pay
attention to the following point:
apply ...
Rear wheel related parts inspection
Refer to “rear wheel assembly removal and installation” .
Tire
Refer to “tire inspection” in section 0b .
Rear brake disc
Refer to “rear brake disc inspection” in section 4c .
Wheel damper
Refer to “drive chain related parts inspection” in section 3a .
Sprocket
Refer to “drive chain ...