When replacing the throttle body assembly or tp sensor with a new one or reinstalling the tp sensor, reset the tp learned value in the following procedures:
Note keep the throttle valves fully closed while resetting the tp learned value. |
Note the leaned value of the tp sensor is set at preset position. |
Radiator reservoir tank removal and
installation
Removal
Remove the right side cowling. Refer to “exterior parts removal and
installation” in section 9d .
Disconnect the reservoir tank inlet hose (1) from the
reservoir tank (2) and drain the engine coolant.
Remove the reservoir tank (2).
Disconnect the reservoir tank ove ...
Battery removal and installation
Removal
Remove the front seat. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Disconnect the battery (–) lead wire (1).
Disconnect the battery (+) lead wire (2).
Note
be sure to disconnect the battery (–) lead
wire (1) first, th ...
Fuel mesh filter inspection and cleaning
Inspect the fuel mesh filter in the following procedures:
remove the fuel mesh filter. Refer to “fuel pump disassembly and
assembly” .
If the fuel mesh filter is clogged with foreign particles,
it hinders smooth gasoline flow resulting in loss of
engine power. Such a filter ...