Suzuki GSX-R 1000 Service Manual: Transmission construction
|
Transmission installation
Install the transmission in the reverse order of removal.
Pay attention to the following points:
Bearing and oil seal
Caution
replace the removed bearings and oil seals
with new ones ...
Countershaft gear / driveshaft gear
disassembly and assembly
Refer to “transmission removal” and “transmission installation” .
Disassembly
Caution
identify the position of each removed part.
Organize the parts in their respective groups
...
Other materials:
Fuel tank removal and installation
Removal
Keep away from fire or spark.
Spilled gasoline should be wiped off
immediately.
Work in a well-ventilated area.
Remove the front seat. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Take ...
Ecm removal and installation
Removal
Remove the frame covers. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Disconnect the battery (–) lead wire.
Remove the tool set (1) and prop stay (2).
Disconnect the hose clamp (3) (e-33 only) and
starter relay (4).
Remo ...
Dtc “c32” (p0201), “c33” (p0202), “c34” (p0203) or “c35” (p0204): primary
fuel injector circuit
malfunction
Detected condition and possible cause
Detected condition
Possible cause
Ckp signal is produced but fuel injector signal is
interrupted by 4 times or more continuity
Injector circuit open or short.
Injector malfunction.
Ecm malfunction.
...