Toyota RAV4 manuals

Suzuki GSX-R 1000 Service Manual: Valve seat repair

Suzuki GSX-R. Valve seat repair


  1. Intake valve
  2. Exhaust valve

Suzuki GSX-R. Valve seat repair


Caution

  •  the valve seat contact area must be inspected after each cut.
  •  Do not use lapping compound after the final cut is made. The finished valve seat should have a velvety smooth finish but not a highly polished or shiny finish. This will provide a soft surface for the final seating of the valve which will occur during the first few seconds of engine operation.
  •  The titanium valves are coated with an oxidized membrane treatment to resist wear but the membrane tend to removed if lapped after valve seat servicing.

 

Note

after servicing the valve seats, be sure to check the valve clearance after the cylinder head has been reinstalled. Refer to “valve clearance inspection and adjustment” in section 0b .

Valve guide replacement
Remove the cylinder head. Refer to “engine top side disassembly” .  Remove the valves. Refer to “cylinder head disassembly and assembly” .  Using the valve guide remover, drive the va ...

Engine bottom side disassembly
Note the crankcase must be separated to service the crankshaft and conrod. Remove the engine assembly from the frame. Refer to “engine assembly removal” .  Remove the e ...

Other materials:

Troubleshooting
This troubleshooting guide is provided to help you find the cause of some common complaints. Caution Failure to troubleshoot a problem correctly can damage your motorcycle. Improper repairs or adjustments may damage the motorcycle instead of fixing it. Such damage may ...

Special tools and equipment
Recommended service material Note required service material is also described in the following. “Rear suspension components”  “rear suspension assembly construction” Special tool ...

Front brake hose removal and installation
Removal Drain brake fluid. Refer to “brake fluid replacement” . 2) Remove the front brake hoses as shown in the front brake hose routing diagram. Refer to “front brake hose routing diagram” . Installation Caution the seal washers should be replaced with the new ones to pr ...

© 2011-2024 Copyright www.suzukigsxr.org