Suzuki GSX-R 1000 Service Manual: Water pump components
|
8
10 N·m
6 N·m (0.6
13 N·m
Apply grease.
Apply engine coolant.
Apply molybdenum oil
Do not reuse.
Thermostat inspection
Inspect the thermostat in the following procedures:
remove the thermostat. Refer to “thermostat removal and installation” .
Inspect the thermostat pellet for signs of cracking.
...
Water pump construction
Impeller
Mechanical seal
Oil seal
O-ring
O-ring
8
N·m (0.8 Kgf-m, 6.0 Lbf-ft)
10 N·m
(1.0 Kgf-m, 7.0 Lbf-ft)
Apply grease.
Apply engin ...
Other materials:
Front brake master cylinder components
Reservoir cap
Plate
Diaphragm
Reservoir tank
Master cylinder
Dust boot
Piston set
Brake lever
Brake lever pivot bolt
Brake lever pivot bolt lock-nut
Brake light switch
Brake hose union bolt
Brake hose
23 N·m (2.3 Kgf-m,
...
Evaporative emission control system
inspection (only for e-33)
Refer to “evaporative emission control system removal and installation (only
for e-33)” .
Hose
Inspect the hoses for wear or damage. If it is worn or
damage, replace the hose with a new one.
Note
make sure that the hoses are securely
connected.
Evap canister
Inspect the eva ...
Service data
Valve + guide
unit: mm (in
Camshaft + cylinder head
unit: mm (in
Cylinder + piston + piston ring
unit: mm (in)
Conrod + crankshaft
unit: mm (in)
Balancer
unit: mm (in)
Throttle body
...