Rear brake caliper parts inspection
Refer to “rear brake caliper disassembly and assembly” .
Brake caliper cylinder
Inspect the brake caliper cylinder wall for nicks,
scratches or other damage. If any damage is found,
replace the caliper with a new one.
Brake caliper piston
Inspect the brake caliper piston surface for any
s ...
Brake fluid
Check the brake fluid level in both front and rear brake fluid reservoirs. If
the level in either reservoir is below the lower mark, inspect for brake pad
wear and leaks.
Warning
Brake fluid is harmful or fatal if
swallowed, and harmful if it
comes in contact with skin or
...
Cooling fan relay inspection
Inspect the fan relay in the following procedures:
remove the frame covers. Refer to “exterior parts
removal and installation” in section 9d (page 9d-
6).
Remove the cooling fan relay (1).
First check the insulation between “a” and “b”
terminals with tester. Then ap ...